MB1061 LV-MaxSonar (10 Pack Sampler)
MB1061 LV-MaxSonar (10 Pack Sampler)
Contains two of each of the LV-MaxSonar-EZ sensors: MB1000, MB1010, MB1020, MB1030 & MB1040.
$225.50
Couldn't load pickup availability
Discounted pricing is shown in the cart.
| Quantity | 5-9 | 10-24 | 25-49 | 50-99 | 100+ |
| Discount | 5% | 10% | 15% | 20% | 25% |
Collapsible content
Specs
- Resolution of 1 inch
- 20Hz reading rate
- 42kHz Ultrasonic sensor measures distance to objects
- RoHS Compliant
- Read from all 3 sensor outputs: Analog Voltage, RS232 Serial, Pulse Width
- Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches
- Maximum Range of 254 inches (645 cm)
- Operates from 2.5-5.5V
- Low 2.0mA average current requirement
- Small, lightweight module
- Designed for easy integration into your project or product
- Varied beam patterns; select the best sensor for your application
Description
When you purchase the MB1061 LV-MaxSonar-EZ 10 Pack Sampler, you receive two of each of the LV-MaxSonar-EZ sensors (MB1000, MB1010, MB1020, MB1030, MB1040).
This sampler pack is great for finding the LV-MaxSonar-EZ sensor that matches the user's application.
Documentation and CAD files
Documents
| LV-MaxSonar-EZ Datasheet | Chaining Application Guide | LV-MaxSonar-EZ Quick Start Guide | RoHS Declaration of Conformity | CE Declaration of Conformity |
Product 3D Models
LV-EZ CAD Files
Software Downloads
None available
Part Numbers
All MaxBotix part numbers are a combination of a six-character base followed by a dash and a three-digit product code. The following table displays all of the active and valid part numbers for this product.
Active Part Numbers
Product Change Notifications Associated with MB1061 LV-MaxSonar (10 Pack Sampler)
No PCNs on Record
Recommended Accessories
-
Pin Header (90 Degree 7 Pin) Attached
View AccessoryConnector Header Through Hole, Right Angle 7 position 0.100″ (2.54mm)
-
Pin Connector (7 Pin) Attached
View AccessoryConnector Header Through Hole 7 position 0.100″ (2.54mm)
-
Straight 7 Pin Connector Attached
View AccessoryConnector Header Through Hole 7 position 0.100″ (2.54mm)
-
-
-
MB7986 Voltage Regulator
View AccessoryThe voltage regulator is used to automatically regulate voltage inputs from 3V to 30V.
Helpful Posts
-
MaxBotix Inc Design Cycle Guide
This guide outlines the process of working with MaxBotix from concept to product design, testing, and deployment and full production. The guide gives you valuable information and Design Tips to...
MaxBotix Inc Design Cycle Guide
This guide outlines the process of working with MaxBotix from concept to product design, testing, and deployment and full production. The guide gives you valuable information and Design Tips to...
-
Understanding Target Acoustics
Acoustically Soft vs. Acoustically Hard Key Takeaways Acoustic properties limit the detection range of certain targets Understanding a target’s acoustic properties helps with sensor selection Targets that absorb more sound...
Understanding Target Acoustics
Acoustically Soft vs. Acoustically Hard Key Takeaways Acoustic properties limit the detection range of certain targets Understanding a target’s acoustic properties helps with sensor selection Targets that absorb more sound...
-
Ultrasonic Sensor MTBF: Mean Time Between Failure
What is MTBF (Mean Time Between Failure)? Mean Time Between Failure measures the time that passes between one previous failure of a mechanical/electrical system to the next failure during normal...
Ultrasonic Sensor MTBF: Mean Time Between Failure
What is MTBF (Mean Time Between Failure)? Mean Time Between Failure measures the time that passes between one previous failure of a mechanical/electrical system to the next failure during normal...
