MB7900 Sensor to 4-20mA Signal Converter
MB7900 Sensor to 4-20mA Signal Converter
MB7900 Sensor to 4-20mA Signal Converter
The MB7900 is an optional add-on for most WR and TankSensor models, enabling seamless integration with systems that require a 4-20mA output. This converter provides a 4-20mA signal through an M12 (8-pin) connection, available in both male and female connector versions, or via flying leads.
With the MB7900, there’s no need for third-party adapters, daughter boards, or additional workarounds to achieve 4-20mA compatibility—everything is built into the solution.
Note: This is not a standalone product. It must be selected as a configurable option for compatible sensors. Selecting "4-20mA" under output will automatically add the MB7900 Sensor to 4-20mA Signal Converter to the sensor's build.
$69.95
Collapsible content
Description
MB7900 Sensor to 4-20mA Signal Converter The MB7900 is an optional add-on for most WR and TankSensor models, enabling seamless integration with systems that require a 4-20mA output. This converter provides a 4-20mA signal through an M12 (8-pin) connection, available in both male and female connector versions, or via flying leads. With the MB7900, there’s no need for third-party adapters, daughter boards, or additional workarounds to achieve 4-20mA compatibility—everything is built into the solution. Note: This is not a standalone product. It must be selected as a configurable option for compatible sensors. Selecting "4-20mA" under output will automatically add the MB7900 Sensor to 4-20mA Signal Converter to the sensor's build.
Specs
Documentation and CAD files
Part Numbers
All MaxBotix part numbers are a combination of a six-character base followed by a dash and a three-digit product code. The following table displays all of the active and valid part numbers for this product.
Active Part Numbers
Product Change Notifications Associated with MB7900 Sensor to 4-20mA Signal Converter
No PCNs on Record
Recommended Accessories
-
Pin Header (90 Degree 7 Pin) Attached
View AccessoryConnector Header Through Hole, Right Angle 7 position 0.100″ (2.54mm)
-
Pin Connector (7 Pin) Attached
View AccessoryConnector Header Through Hole 7 position 0.100″ (2.54mm)
-
Straight 7 Pin Connector Attached
View AccessoryConnector Header Through Hole 7 position 0.100″ (2.54mm)
-
-
-
MB7986 Voltage Regulator
View AccessoryThe voltage regulator is used to automatically regulate voltage inputs from 3V to 30V.
Helpful Posts
-
MaxBotix Inc Design Cycle Guide
This guide outlines the process of working with MaxBotix from concept to product design, testing, and deployment and full production. The guide gives you valuable information and Design Tips to...
MaxBotix Inc Design Cycle Guide
This guide outlines the process of working with MaxBotix from concept to product design, testing, and deployment and full production. The guide gives you valuable information and Design Tips to...
-
Understanding Target Acoustics
Acoustically Soft vs. Acoustically Hard Key Takeaways Acoustic properties limit the detection range of certain targets Understanding a target’s acoustic properties helps with sensor selection Targets that absorb more sound...
Understanding Target Acoustics
Acoustically Soft vs. Acoustically Hard Key Takeaways Acoustic properties limit the detection range of certain targets Understanding a target’s acoustic properties helps with sensor selection Targets that absorb more sound...
-
Ultrasonic Sensor MTBF: Mean Time Between Failure
What is MTBF (Mean Time Between Failure)? Mean Time Between Failure measures the time that passes between one previous failure of a mechanical/electrical system to the next failure during normal...
Ultrasonic Sensor MTBF: Mean Time Between Failure
What is MTBF (Mean Time Between Failure)? Mean Time Between Failure measures the time that passes between one previous failure of a mechanical/electrical system to the next failure during normal...
