Collapsible content
Specs
- Resolution of 1 cm
- 1.8Hz reading rate
- 25kHz Ultrasonic sensor measures distance to objects
- RoHS Compliant
- Read from all 3 sensor outputs: Analog Voltage, RS232 Serial, Analog Voltage Envelope
- Virtually no sensor dead zone
- Maximum Range of 1650 cm
- Operates from 2.7-5.5V
- Low 1.65mA average current requirement
- Small, lightweight module
- Designed for easy integration into your project or product
- Great for cargo detection applications
Description
Features of the MB2532, IRXL-MaxSonar-CSA3, include one-centimeter resolution, an excellent blend of large object detection and side object rejection, range information from 50cm to 1650cm, a 1.8Hz read rate, and various output options: analog voltage envelope, analog voltage, and RS232 serial.
This sensor, unlike many serving this application, was fully tested and verified to work in extreme temperatures from -40°C to +65 °C.
This makes the MB2532 a great choice for cargo monitoring applications.
The MB2532 from the IRXL-MaxSonar-CSline of sensors is a very small, less than one cubic inch, ultrasonic sensor component module. This sensor comes with mounting holes provided on the circuit board for easy installation in nearly all applications.
In addition, the MB2532 provides optical reflectance-based detection combined with sonar to provide virtually 100% detection of objects.
Documentation and CAD files
Documents
Product 3D Models
Cargo Sensors CAD Files
Software Downloads
Part Numbers
All MaxBotix part numbers are a combination of a six-character base followed by a dash and a three-digit product code. The following table displays all of the active and valid part numbers for this product.
Active Part Numbers
Product Change Notifications Associated with MB2532 IRXL-MaxSonar-CSA3
No PCNs on Record
Recommended Accessories
-
Pin Header (90 Degree 7 Pin) Attached
View AccessoryConnector Header Through Hole, Right Angle 7 position 0.100″ (2.54mm)
-
Pin Connector (7 Pin) Attached
View AccessoryConnector Header Through Hole 7 position 0.100″ (2.54mm)
-
Straight 7 Pin Connector Attached
View AccessoryConnector Header Through Hole 7 position 0.100″ (2.54mm)
-
-
-
MB7986 Voltage Regulator
View AccessoryThe voltage regulator is used to automatically regulate voltage inputs from 3V to 30V.