MB1034 LV-ProxSonar-EZ3
MB1034 LV-ProxSonar-EZ3
Ranges from 6 inches to 254 inches. 2-foot detection zone for proximity information with a ~2.5-second acquire time and ~1.5-second release time.
$29.95
Couldn't load pickup availability
Discounted pricing is shown in the cart.
| Quantity | 5-9 | 10-24 | 25-49 | 50-99 | 100+ |
| Discount | 5% | 10% | 15% | 20% | 25% |
Collapsible content
Specs
- Resolution of 1 inch
- ~2.5 second target acquire time*
- ~1.5 second target release time*
- Automatic multi-sensor operation
- People sensor
- Maximum reported range of 254 inches (645 cm)
- ~2-foot proximity detection zone (24 inches or 60 cm)
- Run up to 13+ sensors in the same environment
- Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial
- 42kHz Ultrasonic sensor measures distance to objects
- RoHS Compliant
- Read from sensor outputs: Serial and Pulse Width
- Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches
- Operates from 2.5-5.5V
- Low 2.0mA average current requirement
- Small, lightweight module
- Designed for easy integration into your project or product
- 2 foot detection zone
*Custom times available for a nominal NRE fee
Description
Features of the MB1034, ProxSonar-EZ3, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial.
Th LV-ProxSonar‑EZ line is designed to detect people or obstacles that enter within a calibrated detection zone. The LV-ProxSonar-EZ proximity sensors report when a person or other detectable target enters the detection zone. The target is released after leaving the LV-ProxSonar-EZ's detection zone.
The MB1034 has a detection zone of ~2 feet. The MB1034 will allow for 13+ simultaneous sensors depending on sensor mounting and environment.
Documentation and CAD files
Documents
| LV-ProxSonar-EZ Datasheet |
| Chaining Application Guide |
| RoHS Declaration of Conformity |
| CE Declaration of Conformity |
Product 3D Models
LV-EZ CAD Files
Software Downloads
Part Numbers
All MaxBotix part numbers are a combination of a six-character base followed by a dash and a three-digit product code. The following table displays all of the active and valid part numbers for this product.
Active Part Numbers
Product Change Notifications Associated with MB1034 LV-ProxSonar-EZ3
No PCNs on Record
Recommended Accessories
-
Pin Header (90 Degree 7 Pin) Attached
View AccessoryConnector Header Through Hole, Right Angle 7 position 0.100″ (2.54mm)
-
Pin Connector (7 Pin) Attached
View AccessoryConnector Header Through Hole 7 position 0.100″ (2.54mm)
-
Straight 7 Pin Connector Attached
View AccessoryConnector Header Through Hole 7 position 0.100″ (2.54mm)
-
-
-
MB7986 Voltage Regulator
View AccessoryThe voltage regulator is used to automatically regulate voltage inputs from 3V to 30V.
Helpful Posts
-
MaxBotix Inc Design Cycle Guide
This guide outlines the process of working with MaxBotix from concept to product design, testing, and deployment and full production. The guide gives you valuable information and Design Tips to...
MaxBotix Inc Design Cycle Guide
This guide outlines the process of working with MaxBotix from concept to product design, testing, and deployment and full production. The guide gives you valuable information and Design Tips to...
-
Understanding Target Acoustics
Acoustically Soft vs. Acoustically Hard Key Takeaways Acoustic properties limit the detection range of certain targets Understanding a target’s acoustic properties helps with sensor selection Targets that absorb more sound...
Understanding Target Acoustics
Acoustically Soft vs. Acoustically Hard Key Takeaways Acoustic properties limit the detection range of certain targets Understanding a target’s acoustic properties helps with sensor selection Targets that absorb more sound...
-
Ultrasonic Sensor MTBF: Mean Time Between Failure
What is MTBF (Mean Time Between Failure)? Mean Time Between Failure measures the time that passes between one previous failure of a mechanical/electrical system to the next failure during normal...
Ultrasonic Sensor MTBF: Mean Time Between Failure
What is MTBF (Mean Time Between Failure)? Mean Time Between Failure measures the time that passes between one previous failure of a mechanical/electrical system to the next failure during normal...
