MB1003 HRLV-MaxSonar-EZ0

• Resolution of 1‑mm
• 10Hz reading rate
• Internal temperature compensation
• Cost-effective solution where precision range findings are needed
• Sensor component allows users to lower the cost of their systems without sacrificing performance
• 42kHz Ultrasonic sensor measures distance to objects
• RoHS compliant
• Read from all sensor outputs: Analog Voltage, RS232 or TTL Serial, and Pulse Width
• Virtually no sensor dead zone, large objects closer than 30 cm are typically reported as 30 cm
• Accuracy is factory-matched providing a typical accuracy of 1% or better
• Maximum range of 5000 mm (195 inches)
• Tolerates outside noise sources
• Operates from 2.5V-5.5V
• Low 3.1mA average current requirement
• Small, lightweight module
• Designed for easy integration into your project or product
• Operational Temperature from -0C to +65C (+32F to +149F)
• Real-time automatic calibration (voltage, humidity, ambient noise)
• Option external temperature compensation HR‑MaxTemp
• Firmware filtering for better noise tolerance and clutter rejection
• Widest beam of the HRLV-MaxSonar-EZ sensors
• Great for people detection applications

Features of the MB1003, HRLV-MaxSonar-EZ0, include millimeter resolution, the widest and most sensitive beam pattern of any unit from the HRLV-MaxSonar-EZ sensor line, short to long distance detection, range information from 300mm to 5000mm, a 10Hz read rate, and various output options: pulse-width, analog voltage, and a choice of either RS232 or TTL serial.

This makes the MB1003 an excellent choice for use where high sensitivity, wide beam, or people detection is desired.

The MB1003 from the HRLV-MaxSonar-EZ line of sensors is a very small, less than one cubic inch, ultrasonic sensor component module. This sensor comes with mounting holes provided on the circuit board for easy installation in nearly all applications.

In addition, the MB1003 offers virtually noise-free distance readings through the use of high-output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms. This holds true even in the presence of many of the various acoustic or electrical noise sources.

Documents

Product 3D Models

HRLV-EZ CAD Files

RangeTrack Software